Chip Wringer / Centrifuge

Able to sand up to 600 mm width ✓A minimum of 100 M2 product processing capacity per hour at full capacity ✓CNC-machined (Raw and Primed) surfaces are also the machine that gives the highest level of performance, sanding without damaging the model, without removing the bottom, without radiating. ✓ Upon request, we can produce up to 1800mm width. It is produced for raw and primed sanding of the doors of bathroom cabinets and kitchen cabinets, and each unit has a separate sandpaper. It is suitable for all cnc surfaces. The control system is PLC touch screen. Thanks to its features, it is a very useful product in terms of preventing time loss in the sector and minimizing the extra labor used.

The purpose of these cabins is to provide a healthy painting job by protecting the materials to be painted by hand in a sterile environment from external factors. The water wall in the disposal cabin and the suction system mounted behind it, as well as the positive pressure system above, the particles flying in the air are adhered to the water and the environment is cleaned. Thanks to this, the painting process is made more effortless as the paint is applied in a clean environment. The painted materials are left in the rest room next to the disposal cabinet and the paint is spread on the surface with positive pressure in a warm environment. After a short time, it is taken to the drying room and left to dry with hot air circulation. A suitable working environment is prepared in line with the request of our customers by projecting together with the location determination.