English
Turkish
Arabic
| DIMENSIONS |
Width (800mm), Length(1500mm), Height(700mm) |
|---|---|
| MOTOR POWER |
0.18 KW 1450 cyc/min |
| FLOW CAPACITY |
70 lt/min |
GMS1000 Band Filter
0.00$
Min (10 piece)
GMS 1000 Magnetic Separator
0.00$
Min (10 piece)
GMS700 Band Filter
0.00$
Min (10 piece)
Filtering machine, separates the metal particules via magnetic drum and grinding stone particules and ferrit particules at micron level on the filter paper. Thus cutting fluid is cleaned and surface quality of the product increased. Cutting tool life and cutting fluid life are improved.
Additional information
Reviews (0)
Q & A
Please login to post questions
Company profile
Vendor Info
Vendor Information
- Store Name: GOKMASAN
- Vendor: GOKMASAN
-
Address:
Beşevler Sanayi Sitesi 22. Blok No:19 - 20 Nilüfer
bursa Bursa - No ratings found yet!
More Products
GMS 1000 Magnetic Separator
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
GMS 250 Magnetic Separator
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
GMS 450 Magnetic Separator
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
GMS 500 Magnetic Separator
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
Related products
DRYER 2400 CASE SIDE DRYER
In our machine, which is designed to ensure that the drying process is healthy after the casing and sills are painted, the heating system is made with hot water. In our machine with a processing width of 2400 mm, it is possible to dry the cases and sills as well as the doors. Our machine can work in conjunction with EXPERT 500.
Chip Wringer / Centrifuge
Chip Wringer separates the any kind of swarf formed in metal removing processes through a sheet metal filter from the oil.These oil on the swarf made it contamined(dangerous waste). After centrifuge process the oil percentage is %1-4 and swarf is not contamined. Horizantal,vertical ,45 degree mounted;pnomatic and gravital output options are available.
In every working cycle,chip and cutting fluid automatically discharged and do not stay inside of the machine.
Residual Humidity can be up to %1-4 in accordance with the swarf quality and cutting fluid type.
0,7 mm width metal sheet filter is used.(standard)
Optionally ,Variable speed, soft start and brake can be added. Electronic soft start gives minimal load on the power supply and the brake gives a minimal stopping time, which reduces the time for material changing
Shredder
Long and bushy swarf is broken up at a low rotating speed continuesly by the horizantal swarf shredder. Available for the carbon steel, stainless steel, aluminium alloys, titanium, 1200 N/mm2 and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip wringer.
Swarf is fed through the upside part of the shredder. On the rotating mil and on the back wall of the shredder there are rechangable cutting tools.
Swarf is cut into small pieces by this movement and at the bottom broken chips pass through an oscillating mesh via eccentric arm. Optionally, bar end separator can be added as an externally mounted unit.
4DB-1000 SURFACE SANDING MACHINE
It is a machine that can sand up to a width of 1000mm, has a minimum product processing capacity of 100m² per hour at full capacity, sanding on cnc-processed (raw and primed) surfaces without destroying the model, without removing the bottom, without radius, giving the highest level of performance. It can sand the lathed doors without breaking the lath. If requested, we can produce up to 1800mm width.
3D-600 SURFACE SANDERS
Able to sand up to 600 mm width
✓A minimum of 100 M2 product processing capacity per hour at full capacity
✓CNC-machined (Raw and Primed) surfaces are also
the machine that gives the highest level of performance, sanding without damaging the model, without removing the bottom, without radiating.
✓ Upon request, we can produce up to 1800mm width.
It is produced for raw and primed sanding of the doors of bathroom cabinets and kitchen cabinets, and each unit has a separate sandpaper.
It is suitable for all cnc surfaces. The control system is PLC touch screen. Thanks to its features, it is a very useful product in terms of preventing time loss in the sector and minimizing the extra labor used.
Gold Doypack Packaging
Our packaging machines are very simple to use. Each setting can be adjusted from the touch screen. You can see all the errors that may occur in the machine on the screen. With its nearly 30 years of experience and strong staff, our company produces high-end machines for packaging solutions. Our machines use SMC brand pistons. PLC, drivers and touch screen are LS brand, all other electronic parts are Schneider and Weidmuller brand.
Reviews
There are no reviews yet.