DIMENSIONS |
Length(1000 mm),Width(500mm),Height(1550mm) |
---|---|
TABLA BOYUTLARI |
Length(1000mm),(850mm) |
MOTOR POWER |
1 hp /3000 cyc/min |
INPUT VOLTAGE |
380 AC |
BLOWER |
2600 lt /dk |
FILTERING SYSTEM |
350 mm diameter, back flow cleaning, humidity removing and oiling system for pnomatic system |
WARRANTEE |
1 year from the invoice date |

GMS 450 Magnetic Separator
0.00$
Min (10 piece)

Chip Wringer / Centrifuge
0.00$
Min (10 piece)
Vacuum Dust Collector
0.00$
Min (10 piece)
Vacuum dust collector,filters the any kind of grinding dust occured during the grinding process done at the table by vacuum blower. Filter inside cleans itself automatically. It play an important role while protecting the working environment and human health.
Additional information
Reviews (0)
Be the first to review “Vacuum Dust Collector” Cancel reply
Q & A
Please login to post questions
Company profile
Vendor Info
Vendor Information
- Store Name: GOKMASAN
- Vendor: GOKMASAN
-
Address:
Beşevler Sanayi Sitesi 22. Blok No:19 - 20 Nilüfer
bursa Bursa - No ratings found yet!
More Products
Shredder
0.00$
Min (10 piece)
Long and bushy swarf is broken up at a low rotating speed continuesly by the horizantal swarf shredder. Available for the carbon steel, stainless steel, aluminium alloys, titanium, 1200 N/mm2 and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip wringer.
Swarf is fed through the upside part of the shredder. On the rotating mil and on the back wall of the shredder there are rechangable cutting tools.
Swarf is cut into small pieces by this movement and at the bottom broken chips pass through an oscillating mesh via eccentric arm. Optionally, bar end separator can be added as an externally mounted unit.
GMS 250 Magnetic Separator
0.00$
Min (10 piece)
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
GMS 500 Magnetic Separator
0.00$
Min (10 piece)
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
Vertical Axis Swarf Crusher
0.00$
Min (10 piece)
Long and bushy swarf is broken up at a low rotating speed continuesly by the vertical swarf crusher. Available for the carbon steel,stainless steel,aluminium alloys,titanium ,1200 N/mm2 and higher tensile stregth alloys and easily mounted before swarf briquetting press and chip wringer.
warf is fed through the upside part of the crusher where the bolted and welded cutting knives at the inner surface of the conical hopper are placed.On the rotating arm , rechangable 3 cutting tools work.Swarf is cut into small pieces by this rotating arm and at the bottom of the crushing chamber ,chips become smaller passing through the crusher ring and flow through the output of the crusher with the aid of a revolving arm and fan.
Optionally ,bar end separator can be added inside of the cutting ring witha hydrolic piston or as an externally mounted unit.
Central Filtering System
0.00$
Min (10 piece)
GMS 1000 Magnetic Separator
0.00$
Min (10 piece)
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
Related products
Bar End Separator
0.00$
Min (10 piece)
Bar ends, any kind of tramp materials, cutting tools in the swarf after metal removing processes are separated through bar end separator. Aim is to prevent the harm of the cutting tools in a crusher or unbalance of the centrifuge. Bar end separators can be manufactured in accordance with the process requirements in very different types.
Swarf is fed into the upper hopper of the bar end separator.
Oscillating conveyor embeded on spring plates,working via eccentric movement that makes vibration. Swarf bundles moves forward with the vibration through the conveyor.
Swarf goes through the other side of the osscillating conveyor with the aid of a blower, while the heavy parts goes down under the conveyor with gravity force. Thus, tramp parts are separated from the swarf
Under the falling swarf, horizantal or vertical crushers can be placed.
GMS 450 Magnetic Separator
0.00$
Min (10 piece)
Magnetic separators are the magnetic units used to separate the cutting fluids from metal chips. It ensures the long life cycle of the cutting fluids and cutting tools , prevents the waste of the fluid during separating and environment pollution ,ensures economy. Aid to increase the quality of the part in manufaction.
Central Filtering System
0.00$
Min (10 piece)
GMS700 Band Filter
0.00$
Min (10 piece)
Steel Belt Swarf Conveyor
0.00$
Min (10 piece)
4DB-1000 SURFACE SANDING MACHINE
0.00$
Min (10 piece)
It is a machine that can sand up to a width of 1000mm, has a minimum product processing capacity of 100m² per hour at full capacity, sanding on cnc-processed (raw and primed) surfaces without destroying the model, without removing the bottom, without radius, giving the highest level of performance. It can sand the lathed doors without breaking the lath. If requested, we can produce up to 1800mm width.
Gold Volumetric Packaging
0.00$
Min (10 piece)
Our packaging machines are very simple to use. Each setting can be adjusted from the touch screen. You can see all the errors that may occur in the machine on the screen. With its nearly 30 years of experience and strong staff, our company produces high-end machines for packaging solutions. Our machines use SMC brand pistons. PLC, drivers and touch screen are LS brand, all other electronic parts are Schneider and Weidmuller brand.
FULL AUTOMATIC DOOR, COVER SANDING AND TURNING LINE
0.00$
Min (10 piece)
This line consists of feeding belt, turning unit, brush sander, right or left transfer unit, return belt and a transfer unit that carries the door to the feeding belt, respectively. This system provides automatic or manual loading of the doors, after sanding one side of the doors and automatically turning and sanding the back side. all functions are provided from a single center via plc and touch screen. It has a daily capacity of 200 doors and 3 personnel. 8 doors are processed in one filling. The sanding process of 8 doors is completed in 15 minutes. in progress.
Reviews
There are no reviews yet.